Glass Balustrades — J&N Steelcraft UK Ltd

Glass Balustrades

Frameless and framed glass balustrades for staircases, landings, balconies and Juliet balconies — stainless or powder-coated fittings, toughened glass, made and installed to BS 6180.

Glass balustrades open up a space and let light through while still giving a safe, solid barrier. We design, fabricate and install both frameless systems — where toughened glass is held in a discreet base channel or with minimal point fixings — and framed systems with stainless or steel posts and a handrail on top.

They suit staircases, landings, balconies, mezzanine edges, Juliet balconies and terraces, in homes, offices, bars, restaurants and retail. Fittings can be brushed or polished stainless steel, or powder coated to a colour to match the scheme.

Types of glass balustrade

  • Frameless (channel) — glass panels set into a continuous base channel, with no posts. The cleanest look, and the most common choice for balconies and terraces.
  • Point-fixed (standoff) — glass bolted to the face of a stair, landing or slab edge through stainless discs. Popular on feature stairs.
  • Post and clamp — glass held between stainless or steel posts, with a top rail. Economical, and easy to replace a panel.
  • Framed — glass infill panels in a steel frame, for a stronger industrial or architectural look.
  • Juliet balconies — a single glass panel across a full-height window or door.

Glass and fittings

Glass is toughened, and laminated where the design or location calls for it, with all barriers designed to meet the loadings and requirements of BS 6180 and the Building Regulations. We survey on site so panels fit first time.

Toughened laminated glass is the usual choice for frameless balustrades, because if a sheet breaks the pieces stay bonded and the panel stays in place. Clear, low-iron (extra clear), tinted and frosted glass are all available. Handrails can be stainless, powder coated steel or timber, or left off altogether where the design allows.

Where we've fitted them

At Ravensworth House in Gateshead we fitted an internal balustrade in 21.5mm toughened laminated glass with powder coated handrails. At Tynemouth Castle Inn we made curved external glass balustrades with powder coated posts and handrails, coated to stand up to the salt air on the seafront.

Regulations

Approved Document K sets minimum heights, which differ between stairs, balconies and floor edges, and BS 6180 sets how strong the barrier must be for the way the space is used. A balustrade in a busy bar is designed for far higher loads than one in a house. Our glass balustrade regulations guide explains it in plain terms.

Inside and out

Internal balustrades are usually on stairs, landings, galleries and mezzanine floors. External balustrades on balconies, terraces and roof gardens also have to resist wind and weather, so fixings and coatings are chosen for the exposure, especially near the coast.

Why J&N

As with all our work, the balustrade is designed, made and installed by one team, so the detailing and finish are right and the fit is clean. Because we're steel fabricators, we also make the stair, stringer or balcony steel the glass fixes to, so the whole thing is designed together. All our steel fabrication is to UKAS-approved EN1090-1 Execution Level 3.

Frequently asked questions

Is glass strong enough for a balustrade? Yes, when it's the right glass, thickness and fixing for the load. That's set by BS 6180 and checked at design stage.

Do glass balustrades need a handrail? Not always. A frameless balustrade can work without one if the glass is designed to stay in place if it breaks. Stairs still need a handrail to hold.

Are they hard to keep clean? Glass shows marks, but it wipes clean. Low-iron glass and coatings that reduce marking are available.

Do you make steel balustrades too? Yes. See balustrades and railings and handrails and guardrails, or get a quote.