
Steel Columns & Posts
Universal columns, posts and support steel with base plates and connections — fabricated to EN1090-1 Execution Level 3 and installed as part of frames, extensions and mezzanines.
Columns and posts carry the load down through a structure, and getting the base plates, cap plates and beam connections right is what makes a frame go together cleanly on site. We fabricate universal columns (UCs), hollow-section and fabricated posts, complete with base plates, stiffeners, cleats and the drilled or welded connections your engineer's design calls for.
Column and post types
- Universal columns (UC) — H-shaped sections, the standard choice for frames and heavier loads.
- Square and rectangular hollow sections (SHS/RHS) — neat, easy to box in or leave exposed, popular for posts in homes and canopies.
- Circular hollow sections (CHS) — round columns for exposed and architectural work.
- Fabricated posts — built up from plate and sections where a standard size won't suit.
Fittings and connections
- Base plates with holes for holding-down bolts or resin anchors.
- Cap plates and seating cleats where beams land on top.
- Fin plates, end plates and cleats for bolted beam connections.
- Stiffeners where loads are concentrated.
- Splices so tall columns can be delivered in lengths and joined on site.
Where they're used
They form part of full structural frames, extension goalposts, mezzanine supports and canopy structures, or as individual replacement and strengthening posts in existing buildings. Steel is supplied primed, painted or hot-dip galvanised to suit the environment.
Common jobs include:
- Goalpost frames for knock-throughs, where a post either side carries the beam.
- Posts under beams in extensions and loft conversions.
- Columns for mezzanine floors, canopies and steel frames.
- Replacing failed or overloaded posts, such as old timber or cast-iron columns in warehouses and shops.
Foundations and fixings
A column is only as good as what it stands on. The engineer specifies the foundation or padstone and the fixing into it. On new foundations we supply holding-down bolts with a setting-out plan, so the bolts are cast in exactly where the base plates need them. On existing slabs, posts are usually fixed with resin anchors, once the slab has been checked.
Quality and documentation
All columns are detailed in Tekla, fabricated to EN1090-1 Execution Level 3 and CE/UKCA marked, with material traceability and test certificates provided.
We can design, supply and install as a package, or fabricate to your engineer's drawings for others to erect.
Frequently asked questions
What size column do I need? That's for your structural engineer to calculate, from the load and height. See what size steel beam do I need for how the same process works for beams.
Can a post be hidden in a wall? Often, yes. Hollow sections and small UCs can be built into a wall or boxed in, then fire protected as building control requires.
Can you replace a column in an occupied building? Yes. The structure is propped while the old column comes out and the new one goes in. We plan it with your engineer.
Do you supply the beams too? Yes. See steel beams and RSJs, or send us your drawings.