Steel Handrails & Guardrails — J&N Steelcraft UK Ltd

Steel Handrails & Guardrails

Mild steel and stainless handrails, guardrails and edge protection for industrial, commercial and public buildings, made to measure and to current regulations.

Handrails and guardrails are the everyday steelwork that keeps people safe on stairs, walkways, ramps, roofs, plant areas and loading edges. We fabricate and install mild steel and stainless systems, made to measure for each site.

Handrail or guardrail?

A handrail is something to hold for support, on stairs and ramps. A guardrail (or barrier) stops people falling from an open edge, such as a platform, mezzanine, roof or loading dock. Many installations do both: a guardrail along a landing that becomes a handrail down the stair.

What we make

  • Stair and ramp handrails — to Approved Document K, and to Approved Document M where accessibility applies, with continuous rails, rounded ends and the right grip size.
  • Guardrails and edge protection — with mid rails and kick plates, on platforms, mezzanines, walkways and roofs.
  • Balustrades — vertical bar, flat bar or mesh infill, or glass balustrades.
  • Wall-mounted handrails — on brackets, for stairwells and corridors.
  • Pedestrian barriers — separating people from traffic in yards, car parks and warehouses.
  • Machinery and plant guarding — see machine guarding and safety fencing.

Heights and strength

Guarding heights are set by Approved Document K, and differ between stairs, landings, balconies and floor edges, and between houses and other buildings. BS 6180 sets the load a barrier must resist, which depends on how the space is used. On industrial plant and machinery, access guarding is normally designed to BS EN ISO 14122-3.

Finishes and fixings

External and industrial rails are hot-dip galvanised, often powder coated on top in safety yellow or a building colour. Stainless steel suits high-traffic public areas and wet environments. Fixings are chosen for what we're fixing into, whether concrete, steel, masonry or timber, and the fixings are tested where the specification calls for it.

Everything is surveyed on site and made to suit the actual structure and levels, then installed by our own team with the correct fixings for the substrate — concrete, steel or masonry.

From a single stair handrail to hundreds of metres of factory guardrail, we design, make and fit it to standard.

Frequently asked questions

How high does a handrail need to be? It depends on where it is and how the building is used: the rules differ for stairs, ramps, landings and open edges. We set the height for each project to the regulations that apply. Our glass balustrade regulations guide explains the same rules for glass.

Can you replace existing handrails? Yes. We survey what's there and make new handrails to suit.

Do you make the stairs and platforms too? Yes. See steel staircases and walkways and platforms, or get a quote.