Machine Guarding & Safety Fencing — J&N Steelcraft UK Ltd

Machine Guarding & Safety Fencing

Steel machine guards, mesh safety fencing and plant enclosures for factories and warehouses — made to protect people and equipment, and installed around your operation.

Keeping people away from moving machinery is a legal duty and a practical one, and steel guarding is how it is done. We fabricate welded and bolt-together safety fencing systems, machine and robot-cell guarding, conveyor guarding, and enclosures for plant, tanks and stores — laid out to suit your machinery and access needs.

What we make

  • Perimeter safety fencing — mesh panel systems around machines, robot cells and automated lines.
  • Machine guards — fixed guards over drives, belts, chains and other moving parts.
  • Conveyor guarding — side guards, under-guards and crossover protection.
  • Access gates and doors — hinged or sliding, ready for interlocks.
  • Pedestrian barriers — keeping people separate from forklift and vehicle routes.
  • Enclosures — for compressors, tanks, chemical stores and other plant.

The law and the standards

Under the Provision and Use of Work Equipment Regulations 1998 (PUWER), employers must stop people reaching dangerous parts of machinery. Fixed guards are the first choice where access isn't needed often. Where it is, interlocked gates stop the machine when opened.

Guarding is normally designed to the harmonised standards: BS EN ISO 14120 for the design of guards, and BS EN ISO 13857 for safety distances, which sets how far a guard must be from a hazard for a given mesh size or opening. A bigger opening means the guard has to be further away.

Designed around your machines

Systems are made demountable where maintenance access matters, with access gates and provision for interlocks.

Steel is galvanised or powder coated for a durable, easy-to-clean finish, and mesh infills are sized to the relevant safety-distance requirements.

We look at how people actually use the machine: where they load and unload, where maintenance happens and how often, and where forklifts move. The layout keeps everyday tasks easy, so guards don't get removed or bypassed.

Installation

We survey the layout, fabricate to fit, and install around your operation with minimal disruption — from a single machine guard to a full factory safety-fencing scheme.

Panels and posts bolt together, so installation can often fit into a planned shutdown, weekend or night shift. Fixings into the floor are chosen for your slab.

Why J&N

  • Made in our Peterlee workshop to UKAS-approved EN1090-1 Execution Level 3.
  • SafeContractor approved, and used to working in live factories.
  • We also make walkways and platforms, handrails and guardrails and access stairs, so one supplier can do the lot.

Frequently asked questions

Mesh or solid panels? Mesh lets you see the machine and lets air through. Solid or polycarbonate panels contain swarf, coolant and noise. The mesh size is set by the safety distance.

Can guarding take interlocks? Our gates and fencing can be built ready for interlocks.

Can guarding be moved later? Yes. Bolt-together systems can be altered or moved when the line changes. Talk to us about your site.