
Steel Staircases
Commercial and industrial steel staircases — straight flights, dog-leg and switchback stairs, access and platform stairs — designed, fabricated and installed to EN1090-1 and current building regulations.
A steel staircase is one of the most hard-working elements in a building, and we make them for every setting — straight flights, dog-leg and switchback stairs, external access and escape stairs, platform and plant stairs, and feature staircases where the steel is on show. Stringers, treads and landings are fabricated to suit, with chequer-plate or open-grating treads for industrial use or infilled treads where a finish is applied.
Types of steel staircase
- Straight flights — the simplest and most economical stair, where there's room for a single run.
- Dog-leg and switchback stairs — two or more flights with landings, turning back on themselves to save floor space.
- External access and fire escape stairs — galvanised stairs fixed to the outside of a building. See our fire escape regulations guide.
- Industrial and plant stairs — access to mezzanine floors, platforms and walkways, usually with grating treads.
- Feature and architectural stairs — exposed steel stringers with timber, stone or glass, often with glass balustrades.
- Spiral and helical stairs — where space is tight. See our spiral staircases.
Treads and finishes
Open-grating treads drain water and give a good grip, so they suit external and industrial stairs. Chequer-plate treads give a solid surface. Pan treads are steel trays that are filled with concrete or used as a base for timber, carpet or stone, which suits offices, shops and homes. Nosings can be in a contrasting colour where visibility matters.
Finishes match the setting: hot-dip galvanised for external and industrial stairs, powder coated or painted for interiors, and combinations with glass or timber for architectural feature stairs.
Building regulations
Every staircase is designed to meet the going, rise, handrail and guarding requirements of the Building Regulations, and fabricated to EN1090-1 Execution Level 3 with the documentation to prove it.
Approved Document K sets the limits that make a stair safe to use. For example, a private stair in a house can be steeper than a general access stair in a public or commercial building, which needs shallower risers and deeper treads. Flights need handrails, open sides need guarding, and gaps must be small enough to stop a child falling through. Escape stairs also have to meet the widths and fire separation in Approved Document B.
We size every stair to the floor-to-floor height on site, so the risers come out equal and within those limits. If an engineer or architect has already designed the stair, we work to their drawings.
How it works
- Survey — we measure the opening, floor levels and fixing points on site.
- Design and drawings — fabrication drawings are produced for your approval.
- Fabrication — stringers, treads and landings are made in our Peterlee workshop.
- Finishing — galvanising, powder coating or primer, as specified.
- Installation — our own team fits the stair, handrails and balustrades.
We design, fabricate and install with one team and survey on site so the stair fits first time. For spiral stairs and dedicated fire escapes, we have separate options too.
Frequently asked questions
Are steel stairs cheaper than concrete? Usually quicker, and often cheaper overall. A steel stair is made off site and fitted in a day or two, with no formwork or curing time, so other trades aren't held up.
Can you make a domestic steel staircase? Yes. We make feature stairs for homes as well as commercial stairs, usually with timber or glass to soften the look.
Galvanised or powder coated? Galvanised for anything outside or in a harsh environment. Powder coating gives a colour finish indoors, and can go over galvanising outdoors.
Do you fit handrails and balustrades too? Yes. We make handrails and guardrails, steel balustrades and glass balustrades to go with the stair. Get a quote.