Steel Shopfronts & Entrance Framing — J&N Steelcraft UK Ltd

Steel Shopfronts & Entrance Framing

Structural steel shopfronts, entrance framing and support steel for retail and commercial units — fabricated to suit the glazing and fit-out, and installed to programme.

Behind most shopfronts is steel doing the structural work, and getting it right lets the glazing and fit-out go in cleanly. We fabricate shopfront support steel, entrance frames, lintels and goalpost frames for large openings, canopy and signage support, and sub-frames for glazing and curtain walling.

What we make

  • Opening steel — beams and goalpost frames that carry the building above a widened or new shop opening.
  • Lintels and bressummers — replacing old timber or failed lintels over existing shopfronts.
  • Glazing sub-frames — steel frames that the shopfront or curtain wall glazing fixes to.
  • Entrance frames and portals — feature steel around doors and entrances.
  • Canopy and fascia support — steel to carry canopies, fascias and signage.
  • Security — internal grilles. See security gates and grilles.

Opening up a shopfront

Widening a shop opening, or knocking two units into one, means taking load off the wall above. A structural engineer designs the steel, building control approves it, and the structure is propped while the old wall or lintel comes out. The new steel goes in on padstones or columns, and is fire protected where needed. Our building regs guide explains the approval side.

A new or altered shopfront usually also needs planning permission, and in a conservation area or on a listed building, extra consents, so check with your designer early.

Coordinated with the fit-out

Everything is sized for the opening and the loads above it, and coordinated with your shopfitters and glaziers so dimensions and fixings line up on site.

We survey the opening, take accurate levels and check the existing structure before anything is made, so the glazing contractor isn't left packing out a frame that's out of square.

Finishes and installation

Steel is finished to suit — hot-dip galvanised, painted or powder coated — and where the unit is occupied we can install out of hours to fit the landlord's trading and delivery restrictions.

Visible steel can be powder coated to match the shopfront system, and hidden steel is primed or galvanised for protection behind the cladding.

As with all our work, one team designs, fabricates and installs, so changes during a fit-out are handled quickly. Everything is fabricated in our Peterlee workshop to UKAS-approved EN1090-1 Execution Level 3.

Frequently asked questions

Can you work while neighbouring shops stay open? Yes. We plan deliveries and noisy work around the centre or high street, including nights and early mornings.

Do you supply the glazing? We make the steel the glazing fixes to and work alongside your shopfront or glazing contractor.

Do you work for shopfitters directly? Yes. See steel fabrication for shopfitters, or get in touch.